A mushroom extract can be made from the fruiting body, from the mycelium or from both. On a specification, the line that names the part affects how the other rows are read: what the material grew on, what its polysaccharide figure can include, and how it can be identified.
For a plant extract the source line names a root, a leaf or a fruit. Fungi have parts with names of their own, and one species can give quite different materials. A polysaccharide or β-glucan figure on the same specification can only be read with the method behind it.
Here are four checks to make on these lines. They draw on a National Park Service page and a University of Florida extension guide, official Hong Kong descriptions of two fungal materials, United States labelling law, the European Union’s list of novel foods and two analytical studies. Our earlier articles covered the specification as a whole, the Certificate of Analysis, assay methods and the identification row.
01 / THE PART
Which part of the fungus does the source line name?
The mushroom most people picture is only one part of a fungus. In the words of the United States National Park Service, “What most people consider a mushroom is actually the ‘fruiting body’ of a much larger organism.”1
Behind every mushroom is the mycelium, a dense mat of fungal filaments called hyphae, which “grows on and within the substrate on which the mushroom is found”.1 Mushrooms themselves are “sometimes referred to as ‘fruiting bodies’ or sporocarps”, as a University of Florida extension guide to mushrooms puts it.2
Official Hong Kong texts name the fungal part precisely. Hong Kong’s standard for Ganoderma defines the material as “the dried sporocarp” of two named species.3 For Poria, Hong Kong’s Department of Health describes “the dried sclerotium” of the fungus, and gives the same sclerotium with pine root embedded in it a name of its own, Poria cum Radix Pini.4
In the United States the part must also appear on a dietary supplement label. The federal rules cover ingredients “that are botanicals (including fungi and algae)”: each name must be followed by “the part of the plant” from which the ingredient is derived, and only algae are exempt.5
Check: the part the extract is made from (fruiting body, mycelium, sclerotium or a mixture of them) and the species by its Latin name, in words that match what your label must say.
02 / THE GROWTH
If it is mycelium, what did it grow on?
Mycelium can be grown in a liquid or on a solid material, and what it grew on can stay in the ingredient. The European Union’s list of authorised novel foods has examples of both.
One entry is a mycelial extract from shiitake, defined as “a sterile aqueous extract obtained from the mycelium of Lentinula edodes cultivated in a submerged fermentation”.6 Another is the “freeze-dried mycelia of the fungus Antrodia camphorata (strain BCRC 39106)”, which “has been grown by solid-state cultivation” and is then milled into a powder.6
A third entry is a protein ingredient “produced from the fermentation of a mixture of 65 % pea and 35 % rice protein concentrates by the mycelia of the Shiitake mushroom”.6 Here the fermented protein is the ingredient, and its label name gives both the protein and the fungal part: “Pea and rice protein fermented by Shiitake mushroom mycelia”.6
The list names and defines these ingredients by the part used and the process, not by the species alone, although the shiitake extract may be labelled simply “extract from Shiitake mushroom”.6 The United Kingdom’s own copy of this list, kept since the end of 2020, was revoked on 1 April 2025 by S.I. 2025/361, so novel food status in Great Britain is checked under the British rules now in force.7
For a fruiting body the growing medium matters too. Hong Kong’s standard for Ganoderma has the lower end of the stem cut off, with its culture medium, before the material is dried.3
Check: for mycelium, whether it was grown in a liquid or on a solid material, which material that was and whether it is part of the powder; for a fruiting body, whether the growing medium was removed; and the novel food status of that part and process in your market.
03 / THE FIGURE
What does the polysaccharide figure include?
A polysaccharide figure is a total, and what it includes depends on the method. Hong Kong’s standard measures the polysaccharides of Ganoderma with an anthrone sulphuric acid reagent and states the result as glucose: the dried sporocarp of Ganoderma lucidum “contains not less than 3.6% of polysaccharides [calculated as anhydrous glucose (C6H12O6)], calculated with reference to the dried substance”.3
Starch is a polysaccharide too. A study of reishi (Ganoderma lucidum) supplements sold in the United States notes that starch-like polysaccharides are absent in the fruiting body of reishi but “are frequently employed as excipients, or neutral fillers in dietary supplements”.8 Its authors add: “Starch or malto-dextrin should be excluded for the determination of polysaccharides from G. lucidum dietary supplements.”8
A method published in 2016 tells the kinds of glucan apart. It measures total glucan “(plus free glucose and glucose from sucrose)” after acid hydrolysis, then “α-Glucan (starch/glycogen) plus free glucose and glucose from sucrose” with enzymes, and gives β-glucan “by the difference”.9
So a polysaccharide or glucan figure on its own may include starch, glycogen and sugars, unless the method removes them or reports them separately.
The way the sample is broken down can change the result as well. In the same work, assays based entirely on enzymes in general “yielded much lower values” than the sulphuric acid procedure; the optimised hydrochloric and sulphuric acid procedures gave similar values for most samples, but for certain samples, of Ganoderma lucidum and Poria cocos, sulphuric acid gave “significantly higher values”.9
Our article on assay methods explains why two methods can give different figures for the same extract.
Check: which method gives the polysaccharide or β-glucan figure, whether starch, glycogen and free sugars are excluded or reported separately, and how the sample was hydrolysed.
04 / THE IDENTITY
Does the material match its description?
The 2017 study tested 19 batches of reishi supplements, bought online in the United States in 2015, against a fruiting body of known identity. It found starch-like polysaccharides in 13 of them and triterpenes closely related to the reference in 8, and the measured ingredients of “only 5 tested samples (26.3%) were in accordance with their labels”.8
Its markers were triterpenes and polysaccharides, the components the 2015 Chinese Pharmacopoeia used as markers for this mushroom, and it compared fingerprints of the products with those of the reference.8
Hong Kong’s standard identifies Ganoderma by microscopy, by thin-layer chromatography against a named reference compound, and by a separate liquid chromatography fingerprint for each of its two species, each with its own marker peak.3
Our article on the identification row describes these kinds of test and why a fingerprint is read against a reference.
Check: which markers and tests show the species and the part, whether the comparison is made against a reference of known identity, and, for a mixture of parts, in what proportion they are combined.
WHAT TO SEND
State your mushroom extract requirements with your enquiry
When these lines matter to your product, tell us:
- the species, by Latin name, and the part your specification requires;
- any requirement your specification sets on the growth medium;
- the polysaccharide or β-glucan level you need, and the method your quality team uses for it;
- whether your specification requires starch and other α-glucans to be excluded or reported;
- the markers and identification tests you expect on the Certificate of Analysis;
- your intended application and destination market;
- which technical documents you need, such as a specification sheet or Certificate of Analysis;
- your name, company and contact details.
We offer technical documentation and COA support, and the available document set is confirmed for each ingredient and project. Specification ranges in our catalogue are references, and feasibility, availability and price are confirmed with your quotation.
This article describes published law, standards and studies and gives no polysaccharide method, result, growing medium or novel food status for YOHOLIFE® ingredients; the specification and documents for a selected grade are confirmed when you enquire. Source 1 is a National Park Service page and source 2 a University of Florida extension guide. Sources 3 and 4 are official Hong Kong descriptions of herbal materials, cited for how they name and test the part used. Source 5 is United States labelling law. Source 6 is the European Union list of authorised novel foods, which is in force, in its consolidated text of 10 August 2026; source 7 records that the United Kingdom’s copy of it was revoked. Sources 8 and 9 are research papers; for source 9 only the published abstract was read. Sources were checked on 19 November 2026 and are given for orientation, not as regulatory advice.